Digital Time Relay | Multi-Voltage Timer

Looking for a digital timer relay price in Pakistan for a panel, machine, motor circuit, or automatic control setup? This CNC Electric duty-cycle timer relay is listed at Rs. 2,200 and is built for control jobs where the output must repeat ON and OFF timing in a controlled pattern instead of giving only a one-time delay. For Pakistani panel builders, electricians, OEM workshops, and factory maintenance teams, it is a practical industrial timer switch when you need repeat-cycle timing in control panels, PLC-linked cabinets, pump logic, and machinery panels without depending on manual switching.

Key Features

• Digital time relay for industrial automation panels, distribution boards, control systems, and machinery timing.
• Duty-cycle operation timer for repeated ON/OFF timing rather than only a simple power-on delay.
• Wide voltage: DC 12V–48V and AC 24V–380V 50Hz for flexible industrial and commercial use.
• Low power consumption: DC 1.0W / AC 1.0VA.
• 5A 220V AC output for relay logic, contactor control, pump sequencing, and auxiliary switching.
• Compact 45×45 mm panel cut-out for clean installation inside DB boxes and control cabinets.
• High insulation resistance and dielectric strength for industrial confidence.
• Better than a manual selector switch when the circuit needs automatic cyclic timing.

Technical Specifications

Applications

• Pump-control panels needing repeated ON/OFF timing.
• Conveyor systems and machinery lines with controlled timing patterns.
• PLC-linked control systems requiring cyclic relay timing.
• Motor-control circuits using contactors and phase sequence relays.
• Automation boards in Lahore, Faisalabad, or Karachi for repeatable control.
• Panels with push buttons, indicator lights, and selector switches.

Sizing / Selection Guide

• Choose this model for repeated ON/OFF timing in process control, pump logic, or machine cycling.
• Choose a simple on-delay timer if only one delayed action is needed.
• Check supply voltage matches your actual control circuit.
• Check output duty — heavier loads need a contactor, not direct timer switching.
• Plan panel layout around 45×45 mm cut-out with push buttons, lights, and breakers.

Timer Relay vs Alternatives — Why CNC?

What This Product Does NOT Protect Against

• Not a protection breaker — does not replace breakers, fuses, or RCCB.
• Not a voltage protector for unstable mains.
• Not an SPD for surge or lightning protection.
• Not for heavy direct motor loads — use a contactor.
• Does not correct bad wiring, wrong logic, or poor earthing.

Installation Guide

1. Confirm control supply voltage matches the timer relay.
2. Prepare 45×45 mm panel opening and mount inside a control panel or enclosure.
3. Wire into the cyclic control circuit for your application.
4. Use a contactor for loads larger than 5A output capacity.
5. Test duty cycle before handover.
6. Combine with breakers, SPD, and the Fire Extinguisher Guide.

Cross-Category Links

FAQs

What is a digital timer relay?

A control device that switches output according to a programmed time pattern. This model provides repeating duty-cycle control.

What does duty-cycle operation mean?

Repeated ON/OFF timing behavior, useful for cyclic control in automation, machinery, and pump applications.

Can this work in PLC and automation panels?

Yes. The live page positions it for automation panels, control systems, and PLC systems.

Can I use it in pump panels or conveyors?

Yes. Those are two of its clearest published applications.

What is the digital timer relay price in Pakistan?

Rs. 2,200 on the live CNC Electric Pakistan listing.

Is this better than a manual timer switch?

Yes, when the application needs repeatable automatic timing instead of operator-dependent manual switching.

Can this relay switch heavy motor current directly?

Better used as a control-stage device. Heavy motor loads should go through a magnetic contactor.

How is it installed?

In a 45×45 mm panel cut-out, wired into the control logic. Verify voltage, output load, and timing before energizing.

What should I pair with this timer relay?

Contactors, push buttons, indicator lights, proper breaker protection, and good fire safety practice.

Why choose CNC Electric over unbranded timers?

Branded timer relay with published specs, industrial insulation values, and local support vs. an unbranded timer that may fail under repeated duty cycling.

For a practical duty-cycle timer relay for automation, PLC panels, conveyors, pump controls, or cyclic machinery in Pakistan, this CNC Electric DH48S-S brings repeat-cycle timing, wide AC/DC input, and a familiar industrial panel format. For stock confirmation, wiring help, or advice on pairing with contactors and protective devices, contact CNC Electric Pakistan on WhatsApp before ordering.