Industrial Products
-
DIN-Rail Power Supply 60W | Switching Power Supply 12V / 24V for Control Panels (DR-60)
Price on requestQuick answer: The CNC DR-60 is a 60 W DIN-rail switching power supply that converts AC mains into clean, regulated 12 V or 24 V DC for control panels — powering PLCs, relays, sensors, HMIs and other low-voltage gear. It takes a wide 85–264 V AC input and...Price on request -
Thermal Overload Relay | Motor Overload Protection Relay for Contactors (JR28s / LR2)
Price on requestQuick answer: The CNC JR28S is a thermal overload relay that protects a motor from burning out. It clips onto a matching contactor, senses the motor current, and trips if the motor draws too much for too long — from a stalled rotor, a...Price on request -
Modular AC Contactor 63A 2P | DIN-Rail Installation Contactor with Manual Override (YCCH7)
Price on requestQuick answer: The CNC YCCH7 is a modular DIN-rail AC contactor with a manual override — the same quiet DIN-rail contactor as the YCCH6, plus a front selector that lets you force it ON or OFF by hand, or leave it in AUTO to...Price on request -
Modular AC Contactor 40A 2P | DIN-Rail Installation Contactor for Lighting & Heating (YCCH6)
Price on requestQuick answer: The CNC YCCH6 is a modular DIN-rail AC contactor for switching lighting, heating and other resistive or low-inductive loads remotely and silently from your distribution board. It covers 16 A to 100 A in 2-pole and 4-pole versions, with coil options of 24, 110...Price on request -
Integrated Motor Starter (CPS) 63A | All-in-One Control & Protective Switching Device (YCKB7)
Price on requestQuick answer: The CNC YCKB7 is a Control and Protective Switching device (CPS) — an all-in-one motor starter that combines a contactor, an overload relay and a circuit breaker in a single 3-pole unit. It switches the motor, protects it against overload, and breaks...Price on request -
Solar Pump Drive 0.75–4 kW | DC Solar Water Pump Inverter with MPPT (YCB2200PV)
Price on requestQuick answer: The CNC YCB2200PV is a DC solar pump drive (solar VFD) that runs an ordinary AC water pump directly from solar panels — no batteries required. Its self-adaptive MPPT tracks up to 99% of available solar power, automatically speeding the pump up...Price on request -
Variable Frequency Drive 0.75–7.5 kW | Vector VFD Motor Speed Controller (YCB600)
Price on requestQuick answer: The CNC YCB600 is a vector variable frequency drive (VFD) that controls the speed and torque of a three-phase AC motor — saving energy, giving smooth soft starts, and enabling precise process control. It covers 0.4 kW to 11 kW, accepts single- or three-phase...Price on request -
Motor Soft Starter 5.5–22 kW | Intelligent Reduced-Voltage Soft Starter (YCQR7)
Price on requestQuick answer: The CNC YCQR7 is an intelligent reduced-voltage soft starter for three-phase squirrel-cage motors. It ramps a motor up smoothly instead of slamming it to full power — cutting mechanical shock, belt and gearbox wear, and the heavy start-up inrush that dips your...Price on request -
WiFi 3 Phase Energy Meter | DIN Rail Smart
- Rs.35,000
Rs.37,000- Rs.35,000
- Unit price
- per
Looking for a WiFi 3 phase energy meter price in Pakistan for a panel, building, factory floor, generator setup, or solar monitoring point? This CNC Electric DIN rail smart meter is built for users who want more than a basic kWh counter. At Rs....- Rs.35,000
Rs.37,000- Rs.35,000
- Unit price
- per
-
Digital Time Relay | Multi-Voltage Timer
- Rs.2,200
Rs.2,500- Rs.2,200
- Unit price
- per
Looking for a digital timer relay price in Pakistan for a panel, machine, motor circuit, or automatic control setup? This CNC Electric duty-cycle timer relay is listed at Rs. 2,200 and is built for control jobs where the output must repeat ON and OFF...- Rs.2,200
Rs.2,500- Rs.2,200
- Unit price
- per
-
Power ON Delay Timer | Industrial Relay
- Rs.2,200
Rs.2,500- Rs.2,200
- Unit price
- per
The DH48S Digital Time Relay is a high-precision multifunction timer relay designed for industrial automation, control panels, switchgear systems, and electrical machinery. Built with reliable electronic components and a clear digital display, this power-on delay timer relay ensures accurate timing control across a wide...- Rs.2,200
Rs.2,500- Rs.2,200
- Unit price
- per
-
MCCB 3 Pole 32A-1250A | Industrial Breaker
- Rs.1,400
Rs.1,600- Rs.1,400
- Unit price
- per
CNC Electric Shunt Trip Release Module is a high-performance electrical accessory designed for remote tripping of MCB and MCCB circuit breakers in industrial, commercial, and residential power distribution systems. This compact and durable module allows automatic disconnection of power when connected to external control...- Rs.1,400
Rs.1,600- Rs.1,400
- Unit price
- per
-
Limit Switch XCK-M M115 Mini Roller Lever | IP65 Compact
- Rs.1,400
Rs.1,700- Rs.1,400
- Unit price
- per
XCK-M M115 limit switch is the better choice when a normal-size industrial switch feels bulky for the job. The live product page lists this miniature roller-lever model at 3A and Rs.1,400. That puts it in a very different lane from a larger 10A lever...- Rs.1,400
Rs.1,700- Rs.1,400
- Unit price
- per
-
Limit Switch XCK-T118 Roller Lever | IP65 Industrial
- Rs.1,400
Rs.1,700- Rs.1,400
- Unit price
- per
XCK-T118 IP65 limit switch is the better choice when the machine area is rougher than a clean compact fixture and you still want a roller-lever head. The live Pakistan listing shows this model at 10A and Rs.1,400. That puts it in a different buying...- Rs.1,400
Rs.1,700- Rs.1,400
- Unit price
- per
-
Heavy Duty Limit Switch | Industrial Roller
- Rs.1,400
Rs.1,700- Rs.1,400
- Unit price
- per
MEA-9108 heavy duty limit switch is the right choice when a light machine switch is not going to survive the site. The live Pakistan product page lists this model at Rs.1,400 with a 10A variant. That puts it in a different class from compact...- Rs.1,400
Rs.1,700- Rs.1,400
- Unit price
- per
-
EV Charger Single Phase 3.5kW – AC Wall Mounted Type 2 Electric Vehicle Charging Station with Smart Protection
- Rs.90,000
Rs.100,000- Rs.90,000
- Unit price
- per
Looking for an EV charger price in Pakistan for home parking, office charging, or a small commercial EV point? This CNC Electric 3.5kW single-phase wall-mounted charger is listed at Rs. 90,000 and is built for buyers who want a cleaner, safer, and more professional...- Rs.90,000
Rs.100,000- Rs.90,000
- Unit price
- per
-
EV Charger 7kW Three Phase – Smart Wallbox Type 2 Fast Charging Station
- Rs.105,000
Rs.120,000- Rs.105,000
- Unit price
- per
Looking for an EV charger 7kW 3 phase price in Pakistan for a home, office, fleet point, or commercial parking area? This CNC Electric smart wallbox is built for buyers who want a proper electric car charger instead of an improvised socket-based charging setup....- Rs.105,000
Rs.120,000- Rs.105,000
- Unit price
- per
-
Limit Switch D4MC-2000 Roller Lever | IP65 Industrial
- Rs.600
Rs.670- Rs.600
- Unit price
- per
Limit switch roller lever D4MC-2000 is the right low-cost choice when a moving part approaches from the side and you need a little mechanical reach instead of a straight push. On the live product page this model is listed at 10A and Rs.600. For...- Rs.600
Rs.670- Rs.600
- Unit price
- per
-
Limit Switch Roller Plunger | Industrial
- Rs.600
Rs.670- Rs.600
- Unit price
- per
D4MC-5020 roller plunger limit switch is the right choice when the moving part comes straight into the switch and you want a clear direct-hit signal instead of a wide lever sweep. The live Pakistan listing shows this model at Rs.600 and 10A. That makes...- Rs.600
Rs.670- Rs.600
- Unit price
- per
-
Electronic Complete Distribution Board (Smart LCD DB Panel) – Advanced Wall Mounted Power Control & Monitoring System
- Rs.350,000
Rs.390,000- Rs.350,000
- Unit price
- per
Looking for a smart DB box price in Pakistan for a premium home, commercial site, or advanced building power setup? This CNC Electric Smart LCD DB Panel is listed at Rs. 350,000 and is positioned as a complete wall-mounted power control and monitoring system....- Rs.350,000
Rs.390,000- Rs.350,000
- Unit price
- per
What industrial electrical products does CNC Electric Pakistan stock?
Industrial Pakistani factory-grade: ACBs 1600-6300A, MCCBs to 800A, motor protection (overload relays JR28S, contactors CJX2 9-265A), VFDs, soft-starters, push buttons (LAY5 22 mm series), selector switches, indicator lights, current transformers, ammeter switches, voltmeter switches, three-phase capacitor banks (BSMJ 440V) — all to IEC 60947 industrial standards.
Upgrade your industrial electrical systems with premium industrial products from cncelectric.pk. Our wide range of industrial-grade electrical devices ensures reliable power distribution, protection, and automation for factories, commercial buildings, and heavy-duty installations.
Our Industrial Products Include:
- AC & DC Breakers: Protect circuits from overload, short circuits, and electrical faults. Includes MCB, MCCB, ACB, and Wi-Fi-enabled smart breakers.
- Surge Protection Devices (SPD): Safeguard sensitive industrial equipment from voltage spikes and lightning surges.
- Automatic Transfer Switches (ATS) & Changeover Switches: Ensure uninterrupted power supply by safely switching between main power and backup generators.
- Earth Leakage Breakers & RCBOs: Protect personnel and equipment from electric shocks and leakage currents.
- Magnetic Contactors & Relays: Automate and control motors, pumps, HVAC systems, and industrial machinery.
- Variable Frequency Drives (VFD) & Phase Sequence Relays: Control motor speed and protect industrial systems from phase faults.
- Distribution Boxes & DB Accessories: Organize and protect industrial electrical circuits efficiently.
- Terminal Blocks, VA Selectors & DC Isolators: Ensure safe connections, voltage selection, and isolation in industrial setups.
Why Choose CNC Industrial Products?
- High Reliability: Built to withstand heavy-duty industrial conditions.
- Enhanced Safety: Protects equipment and personnel from overcurrent, short circuits, and electrical faults.
- Wide Compatibility: Suitable for factories, industrial panels, solar systems, and commercial installations.
- Easy Installation & Maintenance: Designed for efficient setup and minimal downtime.
- Competitive Prices in Pakistan: Premium industrial solutions without compromising on quality.
With CNC Industrial Products, you get trusted, efficient, and durable electrical solutions for industrial automation, power distribution, and electrical safety, ensuring smooth operation, protection, and energy efficiency for your facility.
Industrial Products (Industrial-Grade Switchgear) — Frequently Asked Questions
What separates "industrial" from "residential" switchgear?
Industrial-grade devices have higher breaking capacity (10-100kA vs 6kA), higher operational cycles (50,000+ vs 5,000), heavier contacts, IP54+ enclosures, and IEC 60947-2 compliance vs IEC 60898 residential. Built to survive 24/7 motor loads, harmonics, dusty/humid factory floors.
Are CNC industrial products tested to international standards?
Yes. CNC industrial range (YCM7, YCM8 MCCBs; YC1, YC2 contactors; YCB6H MCBs; YCS6/YCS8 SPDs) carry IEC test reports from KEMA-equivalent labs, plus 5-year warranty.
What payment & delivery terms for industrial orders?
Bulk industrial orders: 30% advance, 70% before dispatch. Delivery from Lahore stock 1-3 days nationwide; from China factory 35-45 days for special configurations.
Can I get a single point of contact for a full factory build?
Yes. CNC offers complete electrical room turn-key — main panel + distribution + motor starters + capacitor bank + ATS. WhatsApp +92-300-XXX-XXXX for site survey.
⚠ Pakistan electrical panel fire safety: Every distribution board with motor starters, capacitors, VFDs or batteries needs a DIN-rail aerosol fire-suppression cylinder. Read our complete guide on Fire Extinguisher for Electrical Panels Pakistan — covers BS/EN ISO 14520, NFPA 12 references, cylinder sizing per panel volume, and Pakistani pricing.
