Skip to content
🛡️ 5-YEAR REPLACEMENT WARRANTY ON ALL BREAKERS

3-Phase Voltage Protector Price in Pakistan 2026 — 25A to 200A Buyer Guide

by CNC Electric Pakistan 05 Jun 2026

A 3-phase voltage protector is what factories, commercial buildings, and 3-phase residential installs need to protect against phase failure, voltage sag, and over-voltage — all at once. Pakistani 3-phase distribution feeders are notoriously unstable: phase asymmetry, missing neutrals, dropped phases — every event can cost a 3-phase motor PKR 35,000-180,000 in rewind.

This guide covers 3-phase voltage protector prices in Pakistan for 2026, sizing for 25A to 200A loads, and the wiring to integrate with your existing 3-phase DB box or motor panel.

1. What is a 3-phase voltage protector?

A 3-phase voltage protector continuously monitors all 3 phases (R, Y, B) and cuts the load if any of the following occur:

  • Any phase voltage exits 170-265V safe band
  • Phase asymmetry exceeds 10% (one phase ≠ others)
  • Phase failure (any phase drops out)
  • Wrong phase rotation (will not allow start)
  • Neutral failure (in 4-wire systems)

It restores power automatically once all 3 phases return to normal for a programmable delay (typically 5-30 seconds).

2. 3-phase voltage protector prices Pakistan 2026

Model Amperage Voltage Phases Price PKR
CNC YC3VP-25 25A 380V 3-phase + N 9,500
CNC YC3VP-40 40A 380V 3-phase + N 12,500
CNC YC3VP-63 63A 380V 3-phase + N 16,800
CNC YC3VP-100 100A 380V 3-phase + N 24,500
CNC YC3VP-125 125A 380V 3-phase + N 32,500
CNC YC3VP-200 200A 380V 3-phase + N 52,000
CNC YC3VP-W-63 63A WiFi smart 380V 3-phase + N 22,000
CNC YC3VP-W-125 125A WiFi smart 380V 3-phase + N 42,500

3. Sizing rules for Pakistani 3-phase loads

  1. Total your 3-phase load in kW (sum all motors, ACs, equipment).
  2. Convert to amps: kW × 1000 / (1.732 × 380V × 0.85 PF) = continuous current per leg.
  3. Add 25% safety margin.
  4. Pick the next standard catalogue rating: 25A, 40A, 63A, 100A, 125A, 200A.

Quick lookup

Application Recommended protector
Small workshop 5-10 kW 3-phase YC3VP-25 PKR 9,500
Medium workshop 15-25 kW YC3VP-40 PKR 12,500
Light commercial / restaurant 30-40 kW YC3VP-63 PKR 16,800
Medium commercial 60-80 kW YC3VP-100 PKR 24,500
Large commercial 80-100 kW YC3VP-125 PKR 32,500
Industrial 150-200 kW YC3VP-200 PKR 52,000
Solar prosumer with 3-phase grid feed YC3VP-63 PKR 16,800 minimum

4. Installation in a 3-phase DB box

  1. Power off at the upstream main breaker. Verify zero voltage on each phase with a tester.
  2. Mount the protector on DIN rail or wall depending on model size.
  3. Wire R, Y, B phases + Neutral from the grid feed into the protector's IN terminals.
  4. Wire R, Y, B phases + Neutral from the protector's OUT terminals to the downstream MCB row or motor contactor.
  5. Connect earth to the protector's earth terminal.
  6. Power on. Set parameters:
    - Under-voltage trip: typically 195V per phase
    - Over-voltage trip: typically 265V per phase
    - Asymmetry threshold: 10%
    - Restoration delay: 10 seconds
  7. Test: simulate phase loss by switching off one upstream MCB; protector should trip within 100-300 ms.

5. 3-phase vs single-phase voltage protector

Single-phase protector 3-phase protector
Monitors 1 phase + neutral 3 phases + neutral
Detects phase failure? Yes (the only one) Yes (any of 3)
Detects asymmetry? No Yes
Detects wrong rotation? No Yes
Cheapest model PKR 3,200 (YC7VA 63A) PKR 9,500 (YC3VP-25)

6. FAQ

Cheapest 3-phase voltage protector in Pakistan 2026?

CNC YC3VP-25 at PKR 9,500 — 25A 3-phase + N, suitable for small workshops up to 10 kW 3-phase.

Do I need a 3-phase protector if I have a phase failure relay?

A phase failure relay only detects phase loss. A 3-phase voltage protector adds over-voltage, under-voltage, asymmetry, and rotation protection. Best practice: use both, or use a 3-phase protector that includes phase failure detection.

Will it protect a 3-phase solar inverter?

Yes — install upstream of the inverter's AC input. Protects against grid events that could damage the inverter.

Is the WiFi smart variant worth +PKR 6,000?

For factories where downtime costs money: yes — app alerts, runtime logs, scheduled tests. For typical residential 3-phase: standard variant is enough.

Will CNC YC3VP-series work with Inverex/Knox/Solis solar inverters?

Yes — it's grid-side protection, inverter brand-agnostic. Install between WAPDA feed and your DB/inverter input.

8. Need a 3-phase voltage protector for your install?

Send your total kW load + phase count on WhatsApp +92 326 1111 376. Free Pakistan delivery on orders over PKR 5,000.

Prev Post
Next Post

Thanks for subscribing!

This email has been registered!

Shop the look

this is just a warning
Login
Shopping Cart
0 items
CNC Electric
Online — ready to help
All Voltage On-grid Hybrid Backup Smart Industrial